• Products

  • Contact Us

    OBD2 Toll China

    Emial: obd2013@126.com
    obd2013@126.com

    Skype: OBD2

  • Tags

  • Share

  • Ignition System Quickly Tester (Two In One) ADD790

    You are here: Home » Products » Automotive Electrical Testers & Test Leads » Ignition System Quickly Tester (Two In One) ADD790

    Item No. AD05

    Weight:0.3KG      ( 0.66LB )Package:32cm*18cm*4.5cm      ( Inch:12.6*7.09*1.77 )

    Ignition System Quickly Tester (Two In One) ADD790
    Description

    This product consists of two of our ADD products: ADD760 (Ignition System KV Quick Tester) and ADD750 (Coil on Plug Ignition Quick Tester). The two products are used to test car ignition system.

    ADD750 is used to test COP (Coil on Plug) ignition system. Technicians can use this product to test KV value and Arc (glow) duration output.

    ADD 760 is designed to work on distributor and DIS systems, and it can quick measure KV value of the secondary ignition and compare peak kV, or verify the proper firing of the secondary ignition system.

    Size:32cm*18cm*4.5cm

    Weight:0.6kg
    Features

    The kV/Arc Quick Tester ADD760 is a battery-operated, hand-held tester designed to easily and quickly check the presence of a spark in the vehicle’s cylinders, determine the polarity (+/-), and measure the peak voltage as the spark plug is firing on Distributor and Oistributodess ignition Systems.
    The tester works by receiving a signal transmitted from the spark plug’s wire. In the Quick Check Mode, the red LED light flashes when a spark is detected, If the polarity is negative (-), the green LED lights; and if positive (+),the red LED lights. In the Measurement Mode, the tester measures and displays the peak spark voltage for approximately 15 seconds.
    The Coil On Plug (COP) Quick Ignition tester ADD750 is a battery-operated, hand-held quick tester designed to easily and quickly determine if a COP is producing a proper spark for the plug.
    The quick tester works by receiving a signal from the secondary ignition coil. Once the signal is received, the tester determines if the COP is producing the correct amount of voltage and the duration of the arc. If the voltage is correct, the tester beeps and the red LED light flashes; and if the duration of the arc is correct, the green LED will also flash

    Contact Information:
    Live Support: Chat with us online
    Email: sales@uobd2.org
    MSN: sales@uobd2.org
    Skype: UOBD2COM
    Yahoo: uobd2com@yahoo.com
    If you have any problem, please do not hesitate to contact us.
    Shipment Note:

    If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address.

    Other Items in this category

    Have any question, Please enter the form below and click the submit button.


    *
    *
    *
    *
    2 + 3 = ?
    Please enter the answer to the sum & Click Submit to verify your registration.
    Copyright©2008-2020 www.o-bd.org All Rights Reserved.  
    Sitemap | Top↑