• Products

  • Contact Us

    OBD2 Toll China

    Emial: obd2013@126.com
    obd2013@126.com

    Skype: OBD2

  • Tags

  • Share

  • Lexia-3 Lexia3 V47 Citroen/Peugeot Diagnostic PP2000 V25 with Diagbox V6.01 Software

    You are here: Home » Products » Car Diagnostic Tool » Lexia-3 Lexia3 V47 Citroen/Peugeot Diagnostic PP2000 V25 with Diagbox V6.01 Software

    Lexia-3 Lexia3 V47 Citroen/Peugeot Diagnostic PP2000 V25 with Diagbox V6.01 Software
    Item No. SP08-D

    Weight:
    0.9KG
    Package:
    29cm*19cm*6.5cm      ( Inch:11.42*7.48*2.56 )

    Lexia-3 lexia3 V47 Citroen/Peugeot Diagnostic PP2000 V25 with Diagbox V6.01 Software

    Lexia-3 lexia3 V47 Citroen/Peugeot Diagnostic PP2000 V25 with Diagbox V6.01 Software

    LEXIA-3/PP2000 Features:
    1. Update By CD
    2. Support Multi-Language: English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech

    Hardware and Software Requirements
    Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed. If customer requires, we can prepare ready to work PC.

    LEXIA-3/PP2000 Description:

    1.It is compatible with Citroen cars including: C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on. But please pay attention, according to our customer’s experience, this item can not works good at C5 new models.
    2.It is compatible with most Peugeot cars from 1995..If you have the two types of cars, please pay attention, please check with us first before purchase.
    3.Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

    LEXIA-3/PP2000 Function:

    Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

    1.Read Identification
    Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc…

    2. Read Fault Codes
    Displays all stored and pending fault codes with complete description (e.g. “Rail pressure – too low pressure”).
    Program supports report printing or copy to clipboard.

    3. Clear Fault Codes
    this function clears all stored fault codes and other diagnostic information.

    4. Auto-Scan (Complete Car Scan/Test)
    Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

    5. Measured Values
    Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

    6. Actuator Test
    Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

    LEXIA-3/PP2000 Package List:

    1pc x Main unit with extension OBD2 cable
    1pc x Long 9pin to USB cable
    1pc x Short 9pin to USB cable
    1pc x OBD2 cable
    1pc x 16pin to Clip Cable
    1pc x Instruction for Installation and Activation DVD for PP2000

    Other Items in this category

    Have any question, Please enter the form below and click the submit button.


    *
    *
    *
    *
    2 + 5 = ?
    Please enter the answer to the sum & Click Submit to verify your registration.
    Copyright©2008-2020 www.o-bd.org All Rights Reserved.  
    Sitemap | Top↑