• Products

  • Contact Us

    OBD2 Toll China

    Emial: obd2013@126.com
    obd2013@126.com

    Skype: OBD2

  • Tags

  • Share

  • Original Launch X431 iDiag Auto Diag Scanner for IPAD and iPhone

    You are here: Home » Products » Original Launch X431 Tool » Original Launch X431 iDiag Auto Diag Scanner for IPAD and iPhone

     

    Original Launch X431 iDiag Auto Diag Scanner for IPAD and iPhone

    Item No. SC154

    Weight:
    1.1KG
    Package:
    35cm*28cm*7cm      ( Inch:13.78*11.02*2.76 )

    Launch X431 Auto Diag scanner for IPAD and Iphone, with this Launch X431 Auto Diag, your iPhone or IPAD will turn to be a powerful diagnostic scanner! Please notice there is no software in package.

    Original Launch X431 Auto Diag Scanner for IPAD and iPhone

    There is no ipad in package, picture just for display.
    Update: Online Update
    Language: English

    With this Launch X431 Auto Diag, your iPhone or IPAD will turn to be a powerful diagnostic scanner!

    X431 Auot Diag IOS Requirements:
    X431 Auot Diag works with iphone  ipad  ipod touch with iOS 5.0 or above iOS 5.0.

    Attention: Launch X431 Auto Diag scanner will not come with software in the package, only hardware.But we will offer you Launch X431 register name & password. You need to buy diagnostic software directly from Launch official website-http://www.dbscar.com/.

    Asia Car Software Bundle: 699usd Total 42 Car Models
    Asia Car Software Bundle List: Acura, Changan, ChangCheng, Daewoo, Daihatsu, Flyer, Australia Ford, Hafei, HaoQing, Holden, Honda, HuaChen, Hyundai, Infiniti, Isuzu, Jacty, Jiao, JinLong, JPIsuzu, Kia, Lexus, Luwei_TY, Mahindra, Maruti, Mazda, Mitsubishi, Nissan, Perodua, Proton, Qirui_TY, SSANGYONG, Subaru, Suzuki, Tata, TLIsuzu, Toyota, Xiali, ZhongShun, ZhongTai and ZhongXing.

    European and USA Car Software Bundle: 799USD Total 31 car models
    European and USA Car Software Bundle List: Benz, BMW, VW, Peugeot, Renault, Citroen, Opel, Audi, Smart, EURO Ford, Fiat, Landrover, Seat, Skoda, Rover, Saab, Jaguar, Lancia, Romeo, Dacia, Mini, GMSA, VAZ, Volvo, GM, BXGM, Chrysler, GAZ, Porsche, Sprinter and USAFORD.

    About how to register, how to pay the software and how to download the software, go on reading the next paragraph.
    How to use X431 Auot Diag on iphone Ipad Ipod touch?
    Step 1: Install Terminal Software
    Let me show how to install X431 Auto diag software on Iphone.
    Firstly, open Appstore on your Iphone, and then search X431, in the search result click one area to install, like X431 china, about which area you select, it depends on your location.

    Step 2: Connect X431 Auto Diag diagnostic connector with car and iphone ipad ipod touch

    a. Connect X431 Auto Diag diagnostic connector with car
    Plug DBscar interface near the steering wheel as the following picture shows. And then open X431 Auto Diag ,
    turn on the ignition of the car.

    b: Connect X431 Auto Diag diagnostic connector with iphone ipad ipod touch
    Open the Bluetooth of Iphone to search the device, the name of device Bluetooth is diagnostic connector serial number;
    matching Bluetooth does not need password.

    Step 3: Register CC number

    After connect well the diagnostic connector, open the diagnostic software installed in your iphone (ipad ipod touch),
    click “settings” on the upper right corner to enter and register CC number as the following picture shows,

    Note: you could enter your email address as your user name, also you could register at http://www.dbscar.com/

    Step 4: Connector Registration

    After login, click “connector registration” in the “settings”, (register X431 Auto Diag diagnostic connector into CC account).
    The diagnostic connector serial number will automatically get, if not, please exist the software and enter again or manually input the
    connector serial number ( the SN is marked on the DBScar connector).
    Click serial number and in the box of X431 Auto Diag you open the password letter to get the password.
    Finish registration as the following pictures shows.

    S

    tep 5: Pay the software (you are allowed to pay on the PC)

    After finish registering x431 Auto diag, please click “get the software” (browse http://www.dbscar.com/), log in with the CC number and password.
    Then go to the page for ordering the software, select the software according to the car model, you are available to buy multiple software as you want.

     

    Step 6: Download the software

    Click the diagnostic software to download, download the paid software and the free software (The OBDII software is free of charge).

    Step 7: Now you are ready to use Launch Auto Diag to diagnose car models

    Back to the page of car models selection and click the car model icon you paid. You are ready to diagnose.
    The following pictures show how deal with the southeastern cars.

    Note: when the PLC program releases the newest version, the terminal will give priority to the update of the PLC program.

    Launch X431 Auto Diag Package including:

    1pc x X431 Auto Diag Scanner main unit
    1pc x OBD2 Adapter
    1pc x Connect cable

    Category: Original Launch X431 Tool | Tag:
    Other Items in this category

    Have any question, Please enter the form below and click the submit button.


    *
    *
    *
    *
    5 + 3 = ?
    Please enter the answer to the sum & Click Submit to verify your registration.
    Copyright©2008-2022 www.o-bd.org All Rights Reserved.  
    Sitemap | Top↑