toyota-key-copier-programmer-1
toyota-key-copier-programmer-2
toyota-key-copier-programmer-3
toyota-key-copier-programmer-4
toyota-key-copier-programmer-5
toyota-key-copier-programmer-6
Toyota Key Copier Programmer
Item No. SK42
Weight:
0.6KG
Package:
26cm*18cm*6cm ( Inch:10.24*7.09*2.36 )
Toyota key Copier programmer’s main function: Toyota key
copy,compatible with toyota cars range from 1997 to 2005. Toyota key
Copier can: 1.Read the pin code of the transponder key automatically
2.Write the pin code into the computer transponder of the suited ECU.
3.Match the vehicle without keys and needn’t change any computer when
matching.
Toyota Key Copier
Toyota Key Programmer Function:
1.Read the pin code of the transponder key automatically
2.Write the pin code into the computer transponder of the suited ECU.
3.Match the vehicle without keys and needn’t change any computer when
matching.
Toyota Key Copier Compatible vehicles:
Be suitable for all the Toyota Series from 1997 to 2005.
Be suitable for the wafer key’s match of Toyota, such as LEXUS (LS400
ES300 GS300 IS2000 IS300) , Camry 2. 0, 2. 4, JEEP 2007 3400 4500 4700,
AVALON, PREVIA.
Detail list as follows:
1. Es300 (1997-2003)
2. Gs300 (1997-2003)
3. Gs400 (1997-2000)
4. Gx430 (2001-2003)
5. Is300-IS200 (2001-2003)
6. Ls400 (1997-2000)
7. Lx470 (1998-2002)
8. Rx300 (1999-2003)
9. Sc300 (1998-2001)
10. Sc400 (1998-2001)
11. 4runner (1999-2003)
12. Avalon (1998-2003)
13. Cammry-4cly (1998-2005)
14. Highlander (2001-2003)
15. Lander Cruiser (1998-2003)
16. Mr2 (2000-2003)
17. Rav4 (2000-2003)
18. Sequoia (2000-2003)
19. Sienna (1998-2003)
20. Solara (1999-2003)
21. Previa (1999-2003)
How to do key program?
1.Dismantle the engine ECU from the vehicle (or IMMO) , and take down
the IC chip identified as “93C56″ (fixed to the computer in the vehicle
engine; for the Camry being IC601, and Lexus being IC900.
Identification number for a chip fixed to IMMO is 93LC66) . Clean up
every pin of IC to make sure of a sound connection.
2.Install 93C56 on the device through programmer; make sure that the
connection is good.
3.Supply electricity to the programmer, the screen will show”can work
normal”with a beep sound indicating that the machine is working well.
4.Press”R-key”, and the red light”LED” will be lit; programmer is thus
ready for programming.
5.Put the key on the key logo of the programmer.
6.Press R-key again to hear the beep sound beep 4 times, and the red
light also goes off, these means that the key has been successfully
programming to the programmer. If the beep sound is not made 4 times,
then repeat the operation until you hear the exact 4 beep sound.
7.By the stated operations you can programming 3 keys to the programmer
altogether.
8.Now you can verify whether the 3 keys have been actually programmed:
press R-key, put a key near the key logo, if a 4-beep sound is made,
that means the programming is effective. Every key must be verified so
that they can be program to 93LC56 and 93LC66.
9.Press Pr-A, Pr-B and Pr-C orderly to programming the 3 programmed
keys to 93C56 (or 93LC66) . When “OK” displays, the programming
succeeds; otherwise”ERROR” signal appears. Failure may be due to
misconnection between 93C56 and the programmer, or the reverse
installation or corruption of the chip. In this case you better repeat
the adaptation twice to ensure the success.
Now that IC-93C56 (or 93LC66) has three keys programed to it, you can
now weld it to the engine ECU. Make sure the weld is good.
Fit the ECU back to the vehicle. With any of the previously programmed
keys you can start the vehicle now.
Notice: This machine only provide for locksmiths. Please offer related
business license, original ID card and need to sign the declaration
with us.