• Products

  • Contact Us

    OBD2 Toll China

    Emial: obd2013@126.com
    obd2013@126.com

    Skype: OBD2

  • Tags

  • Share

  • Volvo USB+SD MP3 Adapter(Volvo HU Series)

    You are here: Home » Products » AUTO MP3 Player and Car Inverter » Volvo USB+SD MP3 Adapter(Volvo HU Series)

    Item No. MP08

    Weight:0.2KG      ( 0.44LB )Package:15cm*10cm*4.5cm      ( Inch:5.91*3.94*1.77 )

    Features:

    1. Plug&play, CDC alternative
    2. Connected with wire harness, not FM signal controlled ,Hi-Fi guaranteed
    3. Controlled by vehicle Head Unit, support Steering wheel operation
    4. With imported Hi-Fi Decoding Chip, perfectly support MP3 and WMA tracks
    5. Supports SD/SDHC/MMC card/U Disk/Card Reader/Hard Disk
    6. Supports external audio source(MP3 MP4 PSP Mobile Phone) via AUX in port
    7. Playlist function same as multi CDs
    8. Supports Last Position Memory (LPM)
    9. Vibration and interference proof
    10. Easy to install, no damage to original car decorations for different car models or car radios

    Compatible with:

    1995-2005 Volvo C70
    2001-2004 Volvo S40
    1999-2009 Volvo S60
    1999-2005 Volvo S80
    2001-2004 Volvo V40
    1999-2007 Volvo V70
    1999-2007 Volvo XC70

    Note:

    1.Compatible with follow headunits with 8pin CD changer port: HU403, HU555 , HU601, HU603, HU605, HU611, HU613,HU803, HU650RDS(with Selector knob), HU850RDS(with Selector knob),
    2.Not compatible with Volvo RTI Navigation.
    3.Not compatible with following head units:HU650 without Selector knob, HU850 without Selector knob
    4.Tested radios : HU-601,HU603

    Cable to connect CD Changer Port

    Available Solutions:

    For OEM radios : VW, Audi, Toyota, Honda, Mazda, BMW, Hyundai, Kia, Acura, Lexus, Skoda Citroen, Fiat, Volvo, Mercedes, Nissan, Suzuki, Ford, Renault etc
    For after market radios: Clarion ,Alpine, Blaupunkt, Sony, Sanyo, Panasonic, Pioneer, Becker, JVC etc

    Installation Guide:
    1: Pull out the unit from the car and touch the back of the unit for CDC port when the ignition is switched of.
    2: Insert the CDC plug into the original car port correspondingly. Then insert the storage card.
    3: Then check if the device works normally or not after power supply given from the car itself.
    4: Put the wire harness into the proper and good place after the test successfully.

     

    Other Items in this category

    Have any question, Please enter the form below and click the submit button.


    *
    *
    *
    *
    3 + 5 = ?
    Please enter the answer to the sum & Click Submit to verify your registration.
    Copyright©2008-2020 www.o-bd.org All Rights Reserved.  
    Sitemap | Top↑