• Products

  • Contact Us

    OBD2 Toll China

    Emial: obd2013@126.com

    Skype: OBD2

  • Tags

  • Share

  • X-VCI For GM MDI

    You are here: Home » Products » Car Diagnostic Tool » X-VCI For GM MDI


    X-VCI For GM MDI
    Item No. SP126


    Xtool X-VCI box not only support J2534 reprogramming, but it is also the device of OEM scan. J2534 is the hardware standard for OEM scan.This one is only for GM.
    Update online one year for free.

    X-VCI For GM MDI

    X-VCI GM MDI (Multiple Diagnostic Interface) for ECU reprogramming utilizing J2534. Hardware kit only.
    The X-VCI GM MDI is initially being introduced with Pass-Thru programming capabilities only. It can be used to perform Pass-Thru programming on all vehicles built since 1993 and will support all vehicles into the future.The GM MDI will be required to perform diagnostics on selected NAO vehicles for model year 2009. Diagnostic software is scheduled to be released for the GM MDI during the fourth quarter of 2008.
    When diagnostics are introduced, the MDI will also get a remote data record capability. This permits recording data during road test, similar to the Tech 2 Snap Shot function. A trigger switch connector is provided for this purpose. Regulations require programming procedures to be compliant with SAE Recommended Practice J2534. The GM SPS is compliant with SAE Recommended Practice J2534, and the GM MDI is compliant with the portions of SAE J2534 that are applicable for GM vehicles.
    In Future, the Tech 2 remains an essential tool through at least the 2010 model year. And X-VCI GM MDI can work with tech2win,it can replace the Tech2.So,V-vci can work with Tech2Win and GDS2,It can support all the GM,OPEL,SAAB cars.
    Note: Requires software subscription to GM SPS (Service Programming System), which must be purchased separately via the ACDelco Tech Connect website

    Hardware Specification:
    Processor: 32 BIT high speed ARM processor
    Flash: 512KB
    RAM: 64KB
    Diagnostic Socket: J1962 OBD-II 16 connector
    Wired socket: USB2.0/USB1.1 compatible
    Light: 4 LED light, indicating work statuses
    Power: Vehicle power input: DC 9V-36V, or USB DC 5V
    Consumption: Below 1W
    Size: L x W x H=166 x 95 x 33(mm)
    Working Temperature: -20~ +70 °C
    Storage Temperature: -40~ +85 °C

    Package including:
    1pc x X-VCI GM MDI Main unit
    1pc x OBDII 16Pin Adapter
    1pc x Main Cable
    1pc x USB Cable

    Other Items in this category

    Have any question, Please enter the form below and click the submit button.

    5 + 6 = ?
    Please enter the answer to the sum & Click Submit to verify your registration.
    Copyright©2008-2022 www.o-bd.org All Rights Reserved.  
    Sitemap | Top↑